Determination of the Working Liquids Technical Condition By Analysis of Digital Speckle Images Parameters

Abstract

The article discusses the practical realization for the optical control method of technical working fluids condition by the analysis of digital speckle images parameters is discussed. The experimental research results on the application of this method for estimation of aviation fuel and motor oil technical condition are presented.


Keywords: motor oil, aviation fuel, speckle, autocorrelation, impurities, diagnostics

References
[1] Suslin M.A., Prishchepenko V. V., Melkumov V. N. Study of losses in the fuels with dissolved and emulsified moisture at microwave frequencies // Izmeritelnaya technical, 2016. №3. pp.68-71.


[2] Kazmin A.I. Microwave method and device of the analytical express control the quality of aviation fuel. Electronic journal «Trudi MAI». Vipusk №74: http://trudymai.ru/published.php?ID=49143.


[3] Tuchin V.V. Optical biomedical diagnostics. Moscow: Izdatelstvo Fizikomatematicheskoy literaturi, 2007, T.1 560 p.


[4] A. P. Vladimirov, A. A. Baharev, A. S. Malygin, J. A. Mikhailova, I. A. Novoselova, D. I. Yakin. Application of speckle dynamics for studies of cell metabolism // Proc. of SPIE, 2015, v. 9529, 95291F-1 - 95291F-10.


[5] Fedoretz A.A., Bezugliy B.A. Express-method of identification and quality control of liquid. Patent RF №2247968, 10.03.2005.


[6] Medvedeva S.Y. Creating a laser photometer for the analysis of trace impurities in solutions and gases // Sbornik nauchnih trudov «Nauchnaya sessia NIYU MIFI-2011» pp.59-60.


[7] Vovk T.A., Petrov N.V. Correlation characterization of particles in volume based on peak-to-basement ratio // Scientific reports. 2017. T.7.